Thermoset Epoxy Resin

Italian, Italiano
You are here: Home-> Products -> Pacific Textile Resin -> Thermoset Epoxy Resin
Pacific Industrial Co., Ltd. is a renowned high-end quality Pacific Textile Resin supplier in Taiwan. Pacific Composite offers epoxy resin system for fiber composites and prepreg materials. Our Thermoset Epoxy Resin product line includes room temperature cure system, low temperature cure system, medium temperature cure system and high temperature cure system. We also have rapid cure resin system and flame retardant resin system for which are excellent for automotive and other applications. Please contact us if you want to know more information about Pacific Composite Resin.
  • Thermoset Epoxy Resin - 7-1

Thermoset Epoxy Resin
Model: 7-1
Pacific offers 4 different types of thermoset epoxy resin systems, including:
1. Room Temperature Cure Resin System: 
a. PRR-RT SERIES:
 Feature: Medium viscosity, excellent wet-out of fiberglass, carbon and aramid fibers.
 Curing Condition: RT~100℃
 Suitable Process: Wet layup / RTM / RI

b. PRR-ADR SERIES:
 Feature: Adhesives / Glues, this series is an epoxy based adhesives that is designed for fiber composite adhesion. Three hardeners are available for use with this series and give good peel strength for adherent composites.
 Curing Condition: RT~100℃


2. Low Temperature Cure Resin System:
a. PRL-213 SERIES:
 Feature: Higher temperature service requirement, designed for structural applications with higher thermal resistance and gives excellent wet-out of fiberglass, carbon and aramid fibers.
 Curing Condition: 80℃~150℃
 Suitable Process: Wet layup / RTM 

b. PRL-0428 SERIES:
 Feature: Low curing temperature, and low curing pressure; suitable for large and/or thick-walled curing parts.
 Curing Condition: 75℃~120℃
 Suitable Process: Autoclave / Press moulding / VBO available

3. Medium Temperature Cure Resin System:
a. PRM-TOUT SERIES:
 Feature: Toughened epoxy systems. This series is toughened and controlled flow epoxy matrixes designed for outer pressure processes, featuring:
1. Good impact strength
2. Remarkable fatigue resistance 
3. Less fiber misalignment appearance resistance
 Curing Condition: 130℃~150℃
 Suitable Process: SW/bladder moulding / Press moulding

b. PRM-IP SERIES:
 Feature: Toughened epoxy systems. This series is toughened and controlled flow epoxy matrixes designed for inner pressure processes, featuring:
1. Good impact strength
2. Remarkable fatigue resistance
 Curing Condition: 130℃~150℃
 Suitable Process: Bladder moulding / Press moulding

c. PRM-622 SERIES:
 Feature: With no change of curing parameters under current medium temperature (at 150℃) curing process, this series can impart a shiny and transparent skin to the cured products as well as no 'white spot' after sanding with water. Excellent for woven fabrics.
 Curing Condition: 125℃~150℃

d. PRM-HTG351 SERIES:
 Feature: Toughened epoxy systems; god hot performance.
 Curing Condition: 125℃~150℃
 Suitable Process: Press moulding / Bladder moulding / Autoclave
4. High Temperature Cure Resin System:
a. PRH-HTG434 SERIES:
 Feature: Toughened epoxy system, good hot performance
 Curing Condition: 180℃
 Suitable Process: SW moulding / Autoclave / Press moulding

b. PRH-HTGII SERIES:
 Feature: Toughened epoxy system, good hot performance
 Curing Condition: 180℃
 Suitable Process: Autoclave / Press moulding

c. PRH-MB5M1P SERIES
 Feature: Toughened BMI system; for the requirement of high temperature service above 200℃. In application where the cured composites parts are lightly loaded, short period exposure above 250℃ can be sustained.
 Curing Condition: 180℃
 Suitable Process: Autoclave / Press moulding



5. Rapid Cure Resin System:
a. PRM-D1-R SERIES:
 Feature: 
1. Toughened epoxy resin
2. High cycle moulding process
3. 150℃/3 minutes or 130℃/10 minutes. 
4. High temperature demoulding available (Hot-in-Hot-out).
 Curing Condition: 120℃~150℃
 Suitable Process: Vacuum bag / Autoclave / Press moulding

b. PRM-D2-R SERIES:
 Feature: 
1. Toughened epoxy resin
2. High cycle moulding process
3. 150℃/3 minutes or 130℃/10 minutes. 
4. High temperature demoulding available (Hot-in-Hot-out).
5. For both the application of prepreg of longfiber and sheet molding compound.
 Curing Condition: 120℃~150℃
 Suitable Process: Vacuum bag / Autoclave / Press moulding


6. Flame Retardant Resin System:
a. PRM-D1-RF SERIES:
 Feature: 
1. UL94(V0)
2. FAR 25.853(FST)
3. Rapid cure at 150℃/10 minutes.
4. High temperature demoulding avaliable (Hot-in-Hot-out).
 Curing Condition: 150℃
 Suitable Process: Press moulding

b. PRM-MTC2-RF SERIES:
 Feature: 
1. FAR 25.853(FST+HRR)
2. Designed to meet FST and HRR requirements for aircraft cabin interiors.
 Curing Condition: 135℃~150℃
 Suitable Process: Press moulding

c. PRH-HTG-RF:
 Feature: 
1. FAR 25.853(FST+HRR)
2. Flame retardant epoxy system with above 150℃ service capabilities.
 Curing Condition: 180℃
 Suitable Process: Press moulding

Enquiry Now +Enquiry Now -
Pacific Industrial Co., Ltd. can customize Pacific Textile Resin upon the request of customers. With our professional team, we can match the quality of our product with international standard. Please feel free to contact us, if you are interested in any of our

Thermoset Epoxy Resin

.